Dubstep Music Mastering – Component 1


I’m going to give you a ‘ground up’ teaching of mastering strategies that can be applied to dubstep, and then a actual world instance in the final component. This way is better than giving you lots of true globe examples since you will finish up with a true understanding of why you want to EQ and compress things in a certain way, not just copy a formula that will fail you.

Best your mix.

Don’t presume mastering will be a magic remedy that will cure all your imperfections. You need to get your dubstep mix sounding as close to perfect as you can ahead of even pondering about mastering. Generating positive you have your sounds properly separated, with good subtle EQ and 3D sound stage placement (making use of pan, and reverb and so on). When you feel you cannot do any longer using the tools obtainable you need to then turn to the tricks of mastering such as multi-band compression, linear phase EQ and brick wall limiting.

Do not master ‘in the mix’.

Even believed it is quite tempting to add some good EQ and compression on the master output whilst you are nonetheless generating / mixing the track, it is strongly advisable that you wait till you have completed until applying these processes. You will almost usually get a much better final dubstep track at the finish. Of course its OK to test rough mixes with some master EQ / comp, but constantly bounce the completed track down ‘dry’ and make a backup copy prior to you start mastering.

Get some physique else to do it.

A single of the most critical factors a specialist dubstep mastering engineer can bring, is a fresh set of ears. You might have listened to your track a handful of hundred occasions and have turn out to be accustomed to its flaws, its therefor advisable to outsource this final portion of the approach. There are plenty of on line service that supply tracks for around 30.00 (2009). If that is not an selection, you could often ask a buddy.

Much less is a lot more.

Every single time you apply a dubstep mastering method you are risking degrading the high quality of the audio, even simply adding ‘normalization’ or obtain modify can add little undesirable artifacts to the file. So often program your processes and attempt and use as couple of as achievable. So as an alternative of normalizing at the begin and at the finish, just do it once at the finish and so forth.