How to Install Kitchen Cabinet Hardware


How to set up kitchen cabinet hardware can be a little bit difficult. You want to make some actually precise measurements to make certain everything sits flush and even. Of course there is an upside to carrying out it yourself. You get the exact hardware you want with the added bonus of saving thousands of dollars on a remodel job.

There are all sorts of options accessible in each variety of hardware. We’ll look at a handful of diverse sorts and how to install them.

First factor you need to have to do is install hinges.

You have a couple distinct hinge kinds. Surface mount, and flush mounts are the two most frequent.

Surface mount hinges are a considerably less difficult piece of hardware to install. They install across the face of the cabinet and just need a couple of easy measurements.

Here’s how to set up a surface hinge:

Hold the cabinet door up and mark two hinge positions on the door and on the cabinet itself.

Get a buddy to hold the door up in spot whilst you drill the attach points for the hinges.

The next issue is to screw the hinges in spot.

Swing the door by means of its full range of motion to make sure it swings freely and does not bind up exactly where it contacts the cabinet.

As extended as you have your friend assisting you go ahead and finish mounting up all the cabinet doors at this time.

Installing flush mount hinges is a tougher job that still demands a helper.

With flush mount hinges you need to mark offsets on the interior side of the cabinet. The hinge will wrap about the door frame and attach to the back of the cabinet. Other than that the install process is the very same as for the surface mount hinges.

The subsequent piece of hardware you are going to have to set up is the drawer pulls. The two major types of these are:


Surface mount handles merely set up with a couple of decorative screws via the manage tang. Just hold the handle in position and drive property the two screws. Measure from the center point of the deal with out to the side and bottom of the cabinet door, this offers you a reference point for the handles on all the other doors.

Knobs are just about as simple to install. As soon as once again hold the knob up to the door. Mark the attach point.

Drill through the cabinet door front.

Stick the bolt by way of the hole and tighten up the knob against it.

For knobs that need to have two bolts the process is fairly considerably the identical. The obvious difference is you’ll need to have to stick an additional bolt through. You’ll just have to measure yet another offset and drill two holes.

Hinges, door knobs and drawer pulls are the major elements of kitchen hardware. They demand a tiny bit of mathematical talent to transfer the measurements between cabinets but other than that the installation job is pretty straight forward. How to set up kitchen cabinet hardware isn’t really all that difficult. Just take the measurements and uncover a helper to get the job completed.