How to clean different sort of floors


How to clean different type of floors

Ceramic tiles
These are very easily cleaned with a mop or cloth dipped in a answer of washing up liquid. Alternatively, clean with neat laundry borax applied on a damp mop or a solution of one particular part ammonia to 3 parts hot water. Polish with a chamois leather. A squeegee mop is very best for this variety of floor as it removes most of the water. Be careful when walking on wet ceramic tiles, especially in rubber soled footwear, as they are very slippery. Do not polish the tiles as this will make them permanently slippery.
Grouting in between the tiles should be cleaned from time to time with an old toothbrush dipped into a robust resolution of washing up liquid or household cleaner. Alternatively, use a special grout cleaner.

Cork Tiles
These typically have a sealed, waxed or vinyl finish to prevent water and dirt from penetrating their porous surface. If you are laying cork tiles check that the edges as nicely as the surfaces are sealed or water might seep in from the sides.
Sealed cork just needs mopping more than with warm water and an occasional application of emulsion polish.
Vinyl finished cork need to be damp mopped with an occasional application of emulsion polish.
Waxed cork need to be swept regularly with an occasional wax or liquid polish.
When applying any of these polishes attempt to avoid a develop up of polish about the edges of the space, this will eventually form a sticky deposit that attracts dirt and substances such as talcum powder in bathrooms. It appears really unattractive and is difficult to eliminate, use the back of a knife blade.
Always rinse floor mops in disinfectant resolution soon after property cleaning. Hand off the ground or upside down to dry.

Quarry tiles
Glazed tiles must be washed with a weak answer of household cleaner. They need to be polished with a liquid or paste wax polish, preferably a non slop item.
Unglazed tiles will need to have a more vigorous scrub with a stronger resolution.
Alway rinse with warm clear water and wipe more than with a dry mop.
Faded tiles can be restored to their original color. Eliminate the polish by rubbing with steel wood and white spirit, then wash with household cleaner, rinse and enable to dry. Apply a thin coat of colored wax polish and rub it in properly so that it does not come off on the soles of your shoes.
Newly laid tiles have a tendency to develop white patches, caused by lime working its way up by means of the concrete sub floor. These can be removed temporarily by washing the tiles with a white vinegar solution. Do not rinse off the answer and do not polish the tiles until the white patches cease to seem.

Wood flooring with a waxed surface should be swept with a soft broom and dry mopped to eliminate dust and loose soil. Sticky marks can be removed with a damp cloth wrung out in clean water. Waxed wood should not be washed as water can distort the wood. Apply a coating of wax polish paste with fine grain steel wool from time to time. When the polish builds up to an unacceptable level, i.e. When the floor begins to really feel and appear sticky, take away the old wax with a cloth dipped in white spirit. Enable to dry thoroughly before applying a new coating of wax.
Sealed wood floors ought to be damp mopped to get rid of dust. Apply a coating of wax or emulsion polish from time to time for added shine.